Ads
Setting Up Your Own Radio Station With Winamp
::Must HAVE Winamp (Any Version)::
First, things First your speed has to be at least 256/64 kbps (which means Dial-up users, will have alot of latency, just dnt bother)
Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. My sig)
Now, Your gonna have to download the Shoutcast Files.
Go to www.shoutcast.com to get the files.
Ok After downloading these, installing Both of them in any order I dont care. Go to START -> PROGRAM FILES -> SHOUTcast DNAS -> EDIT SHOUTCAST DNS CONFIG.
Ok your gonna have to Configure it:
Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure you remember)
The Portbase: change it to whatever port you want it.
Maxusers: (lets be realistic here, don't put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.
Now EDIT -> SAVE
Open winamp, RIGHT CLICK -> OPTIONS -> PREFRENCES -> DSP EFFECT -> and choose the NULLSOFT SHOUTCAST.
Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through [url=www.no-ip.com]www.noip.com[/ur;], PORT NUMBER, whatever you did in the EDIT.txt, and your password.
Then go to Encoder, and choose your quality of your music. Go back to [b]OUTPUT -> OUTPUT CONFIG -> YELLOW PAGES[/B]. This is your advertisemant information. do whatever you like there.
Now Connect. to check that your Radio os on-line go to http://(your address that you added in the prefrence) and bam done.
Remember this is an older article so if somthing dosn't work, please dont complain, just let us know your error or problem and we'll do our best to help! :)
Sunday May 27, 2007 - 155 reads